HiTechnic Software Downloads
Sample Model Building Instructions and LDraw PartsThese HiTechnic sample models were created using LDraw family of tools including MLCad, LSynth, LPub, LDGLite, and LDView.
HiTechnic Ball Shooter Building InstructionsBuilding instructions for the HiTechnic Ball Shooter sample model. This model features the HiTechnic Acceleration Sensor used as a tilt sensor in the controller.
|HiTechnic Ball Shooter Building Instructions||1.0||September 1st, 2010||9.73 MB||Download Now|
LDraw Parts Pack for HiTechnic Sensors and MultiplexersThis is a complete set of current HiTechnic sensors and multiplexers modeled for use with LDraw based CAD tools. The parts in this pack include the identifying text that is printed onto the bottom of the sensors and the multiplexer cases. The zip file includes a readme.txt with installation notes and a generated sample image using the parts. Parts were modeled by Philippe “Philo” Hurbain. New with v. 1.1 Added new Angle and Magnetic Sensors.
|LDraw Parts Pack for HiTechnic Sensors and Multiplexers||1.1||October 5th, 2010||271.67 KB||Download Now|
HiTechnic IR RC KartBuilding Instructions for the IR RC Kart. This model is buildable with either an NXT 1.0 or 2.0 sets. Model uses the HiTechnic IR Receiver sensor to make a remote controlled car. Unlike the earlier IR RC Car, this model does not require a differential.
|HiTechnic IR RC Kart||1.0||April 19th, 2011||4.75 MB||Download Now|
IR RC Kart Power Functions RemoteBuilding Instructions for the hand held remote for the IR RC Kart. Buildable with a LEGO Power Functions 8885 remote plus parts from NXT 1.0 or 2.0 sets.
|IR RC Kart Power Functions Remote||1.0||April 19th, 2011||798.39 KB||Download Now|
HiTechnic RotaBot, a Holonomic RotaCaster RobotThis holonomic robot uses three Rotacaster wheel and can drive in any direction independent of the direction it is facing and can even turn while driving.
|HiTechnic RotaBot, a Holonomic RotaCaster Robot||1.0||November 21st, 2011||5.00 MB||Download Now|
LDraw Parts Pack for Rotacaster wheelsLDraw part files for the new Rotacaster wheels. These parts are designed to be used with MLCad and other LDraw based CAD tools. You can see sample usage in the building instructions for the Rotabot also available on this page. These Parts were modeled by Philippe “Philo” Hurbain.
|LDraw Parts Pack for Rotacaster wheels||1.0||December 6th, 2011||10.28 KB||Download Now|
LDraw MATRIX Parts PackThis is a complete set of MATRIX Parts, Fasteners, Controller, Battery Packs, etc. needed to model MATRIX models using the LDraw system of parts. The zip file includes a readme.txt with installation notes and a generated sample image using the parts. Special thanks to Philippe “Philo” Hurbain for all his assistance in creating these parts.
|LDraw MATRIX Parts Pack||1.0||February 22nd, 2014||407.47 KB||Download Now|